Fiberglass Core Mat is a versatile and effective insulator. It can be accepted as a solid glass sheet because it absorbs resin through 100% of its volume. It is not necessary to use directional fibers in the center of the layup. As it is made of Qcells, it does not need directional fibers. It is also abrasion-resistant. For this reason, it can be used for a wide range of applications.

The core mat is composed of synthetic fibers, which act as a bulking agent and are ideal for blocking print-through. Its non-woven structure and high reactivity make it an excellent choice for a wide range of applications, including marine, recreational vehicle, and automotive industries. It wets quickly and conforms to the contours of any mold. Therefore, it is highly adaptable and suitable for all types of projects.

The Polyester fabric provides bulk, serves as a print blocker, and maintains the thickness of a project. The polyester fabric is fully impregnated with resin, resulting in a sturdy, yet lightweight layer. It comes in two standard thicknesses: 1mm and 2mm. It is possible to order offcuts, which are priced at 90g/square. A few pieces are available in random angles. Generally, the Fiberglass Core Mat comes in standard widths of 1020mm and is priced per square foot.

The Composite Fiberglass Core Mat is comprised of a woven polyester fabric core surrounded by a layer of multiaxial polypropylene. The combination of these two types of materials provides a strong rigid layer with low weight. The Composites Industry prefers CSM because it is highly flexible, wets easily, and conforms to the contours of a mold. Its low cost and high performance make it an excellent option for a wide range of applications.

A Fiberglass Core Mat is often sandwiched between a polyester fabric and a multiaxial fabric. The coremat is used to increase the stiffness of a laminate, isolate it from its surroundings and improve surface quality. A Composite Fiber Mat should be stored in a cool, dry area, with a humidity between 10 and 75%. Ensure the Fiberglass Core Mat is stored properly to extend its life. The manufacturer recommends storing the Composite Nonwoven Fibercore Mat in its original packaging for 12 months or more.

FRP products are not always strong enough. While FRP products are usually extremely strong, they can also be vulnerable to print-through, which is an inevitable part of the manufacturing process. A good core mat can help your FRP product last a long time and prevent delamination. Its use in marine and recreational vehicle industries is growing as more manufacturers are realizing its benefits. Moreover, it helps the Composite Material Manufacturer reduce product cost.